Home > Product > Steering Parts

EXiTOTECH steering system parts are specifically designed to meet the needs of various major brands of vehicles. All our products will be 100% inspected before shipment to ensure they conform to IATF 16949 standards.

All EXiTOTECH steering components use Idemitsu Koan grease imported from
Japan to ensure the longest service life and smooth operation.

The company’s experienced production team, advanced automated machinery and
first-class raw materials make EXiTOTECH’s steering and suspension parts durable
and reliable

SUSPENSION Enhanced Safety

Ball Joint

  • Ball housing

    45# steel with normalizing treatment

  • Thread

    Exceed grade 8 rating on smooth and strength.

  • Ball stud

    High precision mirror ball surface

    Ball surface roundness can reach 0.02mm where smoothness can reach 0.4μm

  • Bearing sleeve

    Made of DuPont 500p material

    Over 80% inner touching area

  • Bottom cap

    Cold heading steel

    Over 72 hours anti-rust and salt spray test

  • Dust boot

    Self refined and manufacture Japanese Neoprene rubber.

    Can bearing temperature from -60˚c to 80˚c

  • Screw nut

    Electroplating surface.

    SAE class 8 nut

  • Pin

    Electroplating surface.

    Q-235 material

  • Fixing ring

    65Mn material with heat treatment

Stabilizer Link

  • Ball stud

    High precision mirror ball surface

    Ball surface roundness can reach 0.02mm where smoothness can reach 0.4μm

  • Thread

    Exceed grade 8 rating on smooth and strength.

  • Fixing ring

    65Mn material with heat treatment

  • Dust boot

    Self refined and manufacture Japanese
    Neoprene rubber.

    Can bearing temperature from -60˚c to 80˚c

  • Screw nut

    Electroplating surface.

    SAE class 8 nut

  • Bottom cap

    Cold heading steel

    Over 72 hours anti-rust and salt spray test

  • Bearing sleeve

    Made of DuPont 500p material

    Over 80% inner touching area

  • Dust boot sealing position

    No crack in the sealing position when the ball
      stud swings at the maximum angle.

  • Dust boot sealing position

    Adopt automatic PLC controlling welding machine

    Welding position can bear over 30KN pressure without crack

Control Arm

  • Adopt automatic PLC
    controlling welding machine

  • Heat treatment the surface

  • All dimension should have sharp corners without
    burrs and sharp edges

STEERING

Tie Rod End

  • Pin

    Electroplating surface.

    Q-235 material

  • Dust boot

    Self refined and manufacture Japanese Neoprene rubber.

    Can bearing temperature from -60˚c to 80˚c

  • Ball housing

    45# steel with normalizing treatment

  • Ball stud

    High precision mirror ball surface

    Ball surface roundness can reach 0.02mm
    where smoothness can reach 0.4μm

  • Bearing sleeve

    Made of DuPont 500p material

    Over 80% inner touching area

  • Bottom cap

    Cold heading steel

    Over 72 hours anti-rust and salt spray test

  • Screw nut

    Electroplating surface.

    SAE class 8 nut

Rack End

  • Locking ring

    Electro plating surface

  • Ball Socket

    Over 72 hours anti-rust and salt spray test

    Electro plating surface

    20cr cold heading

  • Ball stud

    High precision mirror ball surface

    Ball surface roundness can reach 0.02mm where smoothness can reach 0.4μm

    Electro plating surface on rack end bar

  • Thread

    Exceed grade 8 rating on smooth and strength.

  • Bearing sleeve

    Made of DuPont 500p material

    Over 80% inner touching area

CONTACT US

Headquarter

Add: No.6,Wenwu Road,Tanbu Town,Huadu District,Guangzhou,China

Tel / Fax: +86-20-37713995

E Mail: info@exitoauto.com

Branch Office (Taiwan)

Add: 8F,No.17,Ln.111,Sec.1,Datong Rd.New Taipei City,Taiwan

Tel / Fax: +886-2-2371-9890

E Mail: info@exitoauto.com

© Copyright 2020 EXiTOTECH auto group. All Rights Reserved